---
title: "Penn engineers turn emergency-blanket Mylar into Moon base insulation; stacks survived 10 heavy squeezes"
url: https://badiyaa.com/mylar-moon-base-insulation-penn/
published: 2026-11-17T06:53:00+00:00
modified: 2026-11-17T06:53:00+00:00
section: Science
publisher: Badiyaa
---

# Penn engineers turn emergency-blanket Mylar into Moon base insulation; stacks survived 10 heavy squeezes

Penn engineers stacked hundreds of Mylar sheets, the film in emergency blankets, into Moon base insulation that survived 10 squeezes at 20 megapascals.

The crinkly foil blanket draped over runners at a marathon finish line could help keep astronauts warm on the Moon. Engineers at the University of Pennsylvania stacked hundreds of sheets of Mylar into an insulator that kept its performance after being squeezed to about 20 megapascals, ten times in a row.

The team, led by mechanical engineer Igor Bargatin with first author Danielle R. Levin, describes the material in the journal ACS Applied Materials & Interfaces. They call it hybrid layered insulating film stacks, or HyLIFS. [The university announced the study](https://www.engineering.upenn.edu/stories/penn-engineers-turn-everyday-mylar-into-a-promising-insulator-for-the-moon/) on October 23.

## The scale of the squeeze

The team says 20 megapascals is roughly 200 pounds pressed onto the area of a fingertip. Put another way, 20 megapascals is about 200 times normal air pressure at sea level, which is close to 0.1 megapascals. “The stacks didn’t survive just one high stress cycle — they survived 10 in a row,” Levin said.

## A hidden particle that moves heat

Thin plastic films stick to themselves, so makers add microscopic “antiblocking” particles that poke out of the surface and keep layers apart. The Penn models suggest that in a vacuum, heat crosses from sheet to sheet mainly where those particles touch the next film.

That explains a surprise. The team expected the thinnest films to insulate best, since more layers fit in the same space. Instead, the thinnest and medium-thickness alumina-coated films performed about the same, likely because the thinner films carried more contact points. “The simplest configuration ended up being the best one,” Levin said.

## The limits

Each sample is about one square centimeter and takes hours to cut and stack by hand. A practical sheet one meter square is 10,000 times larger in area, so the method has to change, perhaps by coating long rolls of Mylar continuously. The researchers say it is still unknown whether the films can survive repeated bending and the scuffs of real use at that size.

## Why the Moon needs tougher insulation

Temperatures on the lunar surface can swing from hundreds of degrees below zero to boiling, according to the Penn team. Any habitat there needs a thick thermal barrier. The trouble is that the best existing vacuum insulators are delicate.

Aerogels are mostly empty space, which makes them superb at blocking heat and easy to damage. Multilayer insulation, the reflective wrap already used on spacecraft, separates shiny films with spacers; it handles radiant heat well but is not built to carry loads and tears when handled. “The ideal material is both resistant to damage and to the loss of heat,” Bargatin said.

## From marathon blanket to lab sample

Mylar is a trade name for [biaxially oriented polyethylene terephthalate](https://en.wikipedia.org/wiki/BoPET), or BoPET, a polyester film. With a coat of aluminum it becomes the familiar [space blanket](https://en.wikipedia.org/wiki/Space_blanket) that reflects body heat back to the wearer.

The Penn group tested films of several thicknesses, coated some with an ultrathin layer of alumina (aluminum oxide) to stiffen them, then stacked them one sheet at a time with tweezers and small weights. “Even breathing near the stack can send the layers flying,” Levin said.

In vacuum tests, the best stacks, compressed as they would be inside a pressurized habitat, reached thermal conductivity comparable to other high-performance vacuum insulators while staying flexible. Coated stacks held their insulating performance even at the highest pressure the lab could apply.

NASA is already gathering lunar base ideas: read about its [Moon Base Challenge for student designs at the lunar south pole](https://badiyaa.com/nasa-moon-base-challenge-students/) and the [$10 billion ceiling for Moon Base cargo landers](https://badiyaa.com/nasa-10-billion-moon-base-landers-clps-2/).

The work was funded by the US National Science Foundation under grant 1845933 and by the university’s engineering school.

## Further reading

- [Wikipedia: BoPET](https://en.wikipedia.org/wiki/BoPET)

- [Wikipedia: Space blanket](https://en.wikipedia.org/wiki/Space_blanket)

*Image: U.S. Navy photo by Mass Communication Specialist 2nd Class Timothy Anderson, Public domain via Wikimedia Commons*

*This article was produced with AI assistance and reviewed by our Editorial Desk. [How we work](https://badiyaa.com/editorial-policy/).*
